Sprint 3200i/32 - 7.5KW - 1Q Isolated

Sprint 3200i/32 - 7.5KW - 1Q Isolated

Model 3200i/32 - DC Motor Control Up To 32 Amps (7.5KW/10HP) Fully Isolated


7.5kW Chassis / Panel Mounted DC Drive - Model 3200i/32 - 32 Amps - Manufacturers Part Number: 3200i/32


Download the Sprint 3200i/32 Manual: Sprint Electrical 3200i/32 Manual


Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals. 
Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an industry standard. 
With line-to-line or line-to-neutral operation up to 48 Amps, you can use this controller in a wide range of motor control applications. You can also integrate this motor controller with other drives and electrical equipment. The 3200i is a fully isolated DC motor controller. 


Specifications at a glance:

  • 32 Amps (7.5KW/10HP) 
  • Fully isolated control electronics 
  • 150 x 200 x 110 (mm) H x W x D 
  • Numerous inputs and outputs for complex system applications
  • Overspeed limit 
  • Over torque limit 
  • Inverse time overload 
  • 50% stall threshold 
  • Phase angle clamp 
  • Precision Reference 
  • Precision tach rectifier 

Technical highlights:

  • Torque control input for basic winding or tension control, with overspeed limiting 
  • Switch selectable Tach or Armature voltage feedback 
  • Volt free change over contacts for zero speed and/or stall 
  • PLC compatible input and output signals 
  • Extra 50% peak torque for 30secs prior to stall trip operation 
  • On board relay indicates zero speed and/or motor overload 

Signal Inputs / Outputs:

Signal inputs:  

  • Speed 
  • Torque 
  • Auxiliary speed inputs +ve and -ve 
  • 4-20mA and 0-20mA 
  • Drive run 
  • Tachogenerator 

Signal outputs:

  • Speed 
  • Current 
  • Setpoint ramp 
  • Total demand 
  • Zero speed and stall relay driver 
  • +/-12 +/- 24v rails 


Low voltage 30/60V AC supply version available for 24/48V DC motors

DC Drives
Armature Current 32Amps
Armature Voltage 180v
Depth 110mm
Height 150mm
Input Voltage 415/240VAC
Model Number 3200i/32
Mounted Panel Mounting
Phases Single Phase
Power Rating 7.5KW
Product Family Sprint DC Drives
Quadrants 1 Quadrant
Width 200mm

Kilowatts to amps calculator

Kilowatts (kW) to amps (A) calculator.


Select current type, enter power in kilowatts, voltage in volts, power factor for AC circuit and press the Calculate button (DC = Direct Current, AC = Alternating Current):


Select current type:  
Enter power in kilowatts: kW
Enter voltage in volts: V
Current result in amps: A
  • £347.00
  • £303.63

Available Options

Tags: Sprint 3200i/32, 7.5KW, 1Q Isolated